It is recommended that we should not directly and simply dispose of used blow-molded pallets as waste products and sell them to manufacturers as old materials. Pallet manufacturers usually recycle scrap at a relatively high price, which can also maximize the price of scrap pallets in the factory. Bl
These scratches will not only affect the overall aesthetics of the product, but also cause a lot of inconvenience during use. You should try to avoid this situation during use. What can be done to avoid scratches on plastic pallets during use? In fact, the method is relatively simple, as long as you
Use area of large plastic pallet: Like outdoor, its surface bearing area is larger, which can hold more goods. It can meet the stacking needs of many goods packaging and improve the utilization rate of the load-bearing surface of the pallet. With the same amount of goods, the center of gravity of or
Because the plastic pallet has the advantages of acid and alkali resistance, non-burning, light weight, beautiful appearance, no static electricity, no nails, no thorns, not easy to rot, not easy to be bacteria multiplied, easy to clean and disinfect, and high recovery rate. It has been widely used
Strong impact resistance: As large plastic pallets have high tolerance standards, thicker plastic pallets are generally selected, which have good impact resistance. The large plastic pallets used in the blow molding process also have good resistance to explosive impact, and can be used routinely in
Compared with other pallets, plastic pallets have the following advantages: explosion-proof type, plastic pallet price, ground non-slip, non-ignitable, plastic pallet net, non-conductive, non-static induction, no nails and no thorns. The appearance is bright and clean, beautiful and generous, the sp
The reason for the aging and brittleness of plastic pallets is that the long-term application of plastic pallets will cause aging, and human factors will be destroyed during the whole application process. Therefore, plastic pallets have a certain lifespan. For waste plastic pallets, generally speaki
The nine-feet pallet of the blow molding process has a hollow cabin structure with its feets, which has a good buffering capacity for violent impact. It can reduce resistance during transportation and has a good shock absorption advantage. Light and easy to take. The nine-feet design can be nested.
Violent use of trucks: Blow-molded pallets also have good performance outdoors. Blow-molded pallets 1412 are not prone to this situation. It is stable overall, with internal pillar structure, and has a good resistance to violent impact. Misoperation at high altitude: On the shelf, when operating at
When using plastic trays in combination with storage shelves, the following points should be noted:The plastic tray with steel tube can assist the tray to use on the shelf and improve the load bearing of the shelf.However, the use of the steel tube tray on the shelf can only improve the bearing capa
English
