What are the requirements for the standardized use of plastic turnover boxes?

The plastic turnover box is generated according to the needs of item turnover and logistics turnover efficiency. At the beginning, it was only used for the internal warehouse and workshop turnover of the enterprise, the operation time was short, and the cover was not needed.

However, from the perspective of the structure of the plastic turnover box, many turnover boxes can be stacked and used. The two boxes are buckled together, which can play a role in dustproof and stable, so it seems that no cover is needed. The plastic turnover box with cover is produced according to the logistics turnover needs, such as: auto parts, T-shaped plastic turnover box stacking, dustproof requirements, etc. The correct and standardized operation of the plastic turnover box in the use process can not only effectively improve the use efficiency of the turnover box, but also play a protective role and increase its service life. Let me share with you some precautions for the use of plastic turnover boxes. Before using the plastic turnover box, it should be cleaned without leaving a trace of dust, so as to avoid pollution caused by the dust remaining in the box during use.

Before and after the use of the plastic turnover box, check the box body for cracks, deformation, etc., and repair it in time. If it cannot be repaired and affects the normal use, it should be replaced in time. If the plastic turnover box needs to be used with some transportation tools or equipment during the operation, the turnover box should be selected according to the actual requirements to avoid damage.

After the plastic turnover box is used, it should be returned to the location for storage, otherwise it may accidentally damage the box or cause problems such as aging. The storage of goods in the warehouse is inseparable from the storage space. The time of material warehousing is to determine the storage space of the goods. After finding the storage space, of course, a clear sign is made to facilitate future pickup and daily management.

When transporting goods in a turnover box, it is necessary to comply with the regulations on the stowage of the turnover box. For example, for the same batch of goods, the quantity and weight of each plastic turnover box need to be consistent, and there can be no more or less, different consignees and The goods cannot be mixed in the same turnover box. The plane of the turnover box should be used to load all the goods, stack them evenly, the four sides of the box should be flat, the four corners should be 90 degrees, and the top should be kept horizontal. In this way, the transportation is stable. In addition to the head mark on the original package, it is also required that the position on both sides of the fork arm of the turnover box forklift must be inserted, plus the gross weight of the goods transported by the turnover box, the destination address, and the size of the turnover box. Information such as the number and number of pieces, it is necessary to pay special attention to the fact that the cargo weight of each plastic turnover box cannot exceed the specified maximum gross weight upper limit.