Use and maintenance of plastic tray

As an indispensable part of the warehousing and logistics industry, plastic pallet plays an important role.

If the plastic pallet is used according to the correct usage specification, it can not only give full play to its own role, but also extend its service life and reduce the purchase cost of the plastic pallet.

A few points should be noted when using the plastic tray:

1. Handle the plastic tray to avoid damage caused by uneven force when landing.

2. When placing the goods, they should be placed evenly to avoid side deviation during lifting and handling.

3. When using the handling equipment, the difference size should be considered whether it is suitable for the use of the plastic pallet to avoid improper size and damage to the plastic pallet.

4. When stacking, the load bearing of the bottom pallet should be considered.

The correct use of plastic pallet should be to do the packaging combination on the plastic pallet with the appropriate packaging and packaging, easy to use mechanical loading and unloading and transportation, so as to meet the requirements of loading, unloading, transportation and storage.In order to make the plastic pallet can be used safely for a long time, it is expected to use the plastic pallet correctly according to the following requirements:

1. The plastic tray should avoid exposure to the sun, so as not to cause aging, shorten the service life.

2. It is strictly prohibited to throw the goods in the plastic pallet from a height.Reasonably determine how goods are stacked in pallets.Goods evenly placed, do not pile up centralized, eccentric pile up.Pallets carrying heavy loads should be placed on flat surfaces or surfaces.

3. It is strictly prohibited to drop the plastic pallet from a high place to avoid the pallet breaking and cracking caused by violent impact.

4. When the forklift or manual hydraulic truck is working, the fork prongs should be as far as possible to the outside of the fork hole of the pallet by foot, the fork prongs should all be inserted into the pallet, and the Angle can be changed after the pallet is lifted smoothly.Fork thorn can not hit the side of the tray so as not to cause the tray broken, crack.

5. When the pallet is put on the shelf, the rack type pallet must be used. The bearing capacity shall be determined according to the rack structure.