In several cases of plastic pallets, what standard should the load-carrying requirements meet?

Pay attention to the load-bearing of the shelf: In the analysis of the load-bearing capacity of the Rackable Solid Deck Plastic Pallet, if it needs to be placed on the shelf, pay attention to the possible permanent deformation and deflection.

Deflection - the national standard is up to 30mm, but this value is slightly wider in practical applications. It is recommended that when Heavy Duty Rackable Plastic Pallet is placed on the shelf, the deflection should not exceed 20mm to ensure safety.

For automated three-dimensional warehouses, when it needs to be used with electric forklift equipment, the deflection requirements are more stringent, even within 10mm.

Shelf carrying range: its definition refers to the maximum load allowed when placing the goods on the hollow shelf after the Durable Use Plastic Pallet loads the goods. This value is the minimum value among dynamic load, static load, and shelf load, so it should be noted that it is different from shelf structure, ambient temperature, and storage period when selecting models.

The nine-feet type cannot be placed on the shelf, while the Chuan character, Tian character, and double-sided structure can be placed on the shelf.

At low temperatures, pay attention to products made of new cold-resistant polyethylene HDPE materials to prevent polypropylene PP materials from becoming brittle.

For load-bearing analysis, generally adding steel pipes, the load-bearing range on the beam frame can reach 0.7-1T, and it may only reach 0.2T-0.3T without time. Therefore, the correct model must be selected according to the bearing capacity range to prevent the steel pipe from falling.

The static load range is relatively large: when the Heavy Duty Stacking Pallet product is only placed on the ground, the static load can be considered. This refers to the weight range that the negative sheet can bear during the stacking process, which can generally reach 6-8T.

Dynamic load: This is a main bearing capacity parameter that is considered daily. In the load-bearing analysis of plastic pallet manufacturers, dynamic load refers to the weight range that light-duty plastic export pallets can carry when electric forklifts move. Single-Faced Injection Molding Plastic Pallet can reach 0.5-2 tons, while blow molding pallet can reach 2.5 tons.

It can be seen from the above that three parameters need to be paid attention to when selecting models: dynamic load, static load, and shelf load. It is necessary to consider how to select the model according to the working conditions. Pay special attention to the shelf load, because this value is very small, does not overload, so as not to cause the phenomenon of breaking from the shelf.